cisco2811设备配置手册

Cisco2811设备配置，早前配置的整理资料；根据客户需求配置的，好久没有搞路由交换设备了，由于当时供货商一时缺技术，整理下给自己做个备份。

——————————–

cisco con0 is now available

Press RETURN to get started.

———————————————————————–
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username “cisco” with the
password “cisco”. These default credentials have a privilege level of 15.

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN
CREDENTIALS

Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want
to use.

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.

For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
———————————————————————–

% Password expiration warning.
———————————————————————–

Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username “cisco” for one-time use. If you have
already used the username “cisco” to login to the router and your IOS image
supports the “one-time” user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.

It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you want to
use.

———————————————————————–

cisco>
cisco>
cisco>
cisco>en
Password:
Password:
cisco#
cisco#
cisco#
cisco#show runn
cisco#show running-config
Building configuration…

Current configuration : 4433 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec

[1] [2]  下一页